The high temperature weather strikes again. Do you have any suggestions for the management of the precession vortex gas flowmeter in the later stage?

  At present, the intense high temperature has experienced the widest range of high temperature process this year. In the next 10 days, the high temperature in the south will not go offline, and the firepower is still on full swing. For strong high temperature weather, how to maintain the high temperature management of the precession vortex flowmeter in the later stage? What measures are there? Let me take you to discuss:

  The installation, maintenance and post-management of the precession gas flowmeter are described as follows:

  (1) Do the process installation

  The precession vortex flowmeter does not have many special requirements for the installation and use environment of the process, but any type of flowmeter has one thing in common, that is, to avoid vibration and compression of components flowing in a high temperature environment as much as possible (machine , separators, pressure regulators, large and small heads, manifolds, elbows, etc.) to keep the inner wall of the straight pipe section before and after the flowmeter smooth and straight, and to ensure that the measured medium is a clean single-phase fluid.

  (2) Pay attention to internal maintenance

  If the measuring chamber of the instrument and its components need to be checked or cleaned regularly due to gas or other reasons, special attention must be paid to the following points: For vortex flowmeters with the same specifications, other core components cannot be interchanged. Otherwise, the instrument must be recalibrated. measurement coefficients, and the accompanying temperature and pressure sensors must be systematically calibrated.

  (3) Strengthen post-management

  Although the vortex flowmeter has various automatic processing functions and micro-power consumption characteristics, it still needs to be strengthened after operation. For example, to ensure the accuracy and reliability of the long-term operation of the flowmeter (to avoid unplanned outages and data loss), system calibration should be performed periodically (every 1 to 2 years), and the header data should be replicated (daily or weekly) for changing media parameters (monthly or quarterly) and check battery status from time to time, check flow meter coefficients and seals.

  The hot and high temperature weather continues to heat up. If you encounter problems with the external flowmeter, please call Weihai Kunke Flow Meter Co., Ltd., the installation, maintenance and use quality assurance are within our scope, so you don't have to worry about after-sales problems. The person is in charge. We Weihai Kunke have 24-hour after-sales service and will wholeheartedly solve your worries. Pay attention to the editor and remember that the content in the next issue will be more exciting.